How to Replace Fiskars Pruner Cutter Head: Step-by-Step Guide

Ever found yourself struggling to trim your garden with a dull pruner cutter head? What if there was an easy solution to get your Fiskars PrunIt StikIt Pruner back in action? Picture this: you’re effortlessly snipping away at overgrown branches with precision and ease. Sounds like a dream, right?

Step 1: Gather Necessary Tools

To replace the Fiskars PrunIt StikIt Pruner cutter head, you’ll need a few essential tools to ensure a smooth process. Here’s what you’ll need:

  • New cutter head replacement
  • Screwdriver
  • Work gloves
  • Safety goggles
  • Clean cloth

Make sure to have all these tools ready before you begin the cutter head replacement process.

Step 2: Prepare the Pruner

  • Acquire a clean workspace: Find a well-lit area with ample space to lay out your tools and work without distractions.
  • Inspect the pruner: Check for any existing damage or debris that may hinder the replacement process.
  • Put on your work gloves and safety goggles: Ensuring your safety is key before handling any tools or equipment.
  • Keep a clean cloth handy: You’ll need it to wipe down the pruner during and after the replacement.

Step 3: Remove the Old Cutter Head

When you’re removing the old cutter head from your Fiskars pruners, it’s important to follow these steps carefully:

  • Unlock the Pruner: Ensure that the pruner is unlocked to give you easy access to the cutter head.
  • Loosen the Nut: Use the appropriate tool to loosen the nut that secures the cutter head in place.
  • Remove the Nut and Washer: Once the nut is loose, carefully remove it along with any washers attached.
  • Take Out the Old Cutter Head: Gently pull out the old cutter head from the pruner assembly.
  • Inspect for Damage: Look closely at the removed cutter head for any signs of damage or excessive wear.
  • Clean the Area: Before proceeding, take a moment to clean the area where the old cutter head was removed.
How to Maintain and Extend the Lifespan of Your Fiskars Power Stroke Tree Pruner

By following these steps, you can safely and effectively remove the old cutter head from your Fiskars pruners.

Step 4: Attach the New Cutter Head

To attach the new cutter head to your Fiskars Pruning Stik, follow these simple steps:

  • Place the new cutter head into the slot, ensuring it aligns correctly.
  • Insert the securing nut and washer back in place, tightening it to secure the cutter head.
  • Lock the pruner back into position to complete the attachment process.

Remember to test the pruner after attaching the new cutter head to ensure that it functions correctly.

Step 5: Test the Pruner

Now it’s time to test your pruner after attaching the new cutter head. Here are the steps to ensure everything is in working order:

  • Test the Cutting Action: Hold a small branch and make a cut to ensure that the pruner cuts smoothly and cleanly.
  • Check for Proper Alignment: Make sure the blades are properly aligned and cutting parallel to each other.
  • Inspect for Any Issues: Look for any signs of malfunction or unusual noises during operation.

It’s essential to test the pruner before regular use to prevent any accidents or issues down the line. If you encounter any problems during the testing phase, revisit the steps to make sure everything was done correctly. Safety first!

Pro Tips

  • Apply Lubrication: Regularly oil the blades and moving parts to maintain smooth operation and prevent rust.
  • Store Properly: When not in use, store your pruner in a dry place to avoid moisture damage.


You now have all the necessary steps to replace the cutter head on your Fiskars pruner. Remember to follow the guide carefully, ensuring proper placement and tightening of the new cutter head. Regular maintenance is key to keeping your pruner in top condition, so don’t forget to lubricate the blades and store it correctly. Testing the pruner after replacement is crucial for safety and optimal performance. By following these instructions, you’ll be able to maintain your Fiskars pruner effectively and enjoy hassle-free pruning sessions. Happy gardening!

Maintain and Sharpen Your Fiskars Tree Pruner: A Comprehensive Guide

Frequently Asked Questions

How do I remove the cutter head from my Fiskars pruners?

To remove the cutter head, unlock the pruner, loosen the securing nut, inspect the old cutter head, and clean the area.

How can I attach a new cutter head to my Fiskars pruners?

To attach a new cutter head, place it correctly, insert the securing nut and washer, tighten them, and lock the pruner back into position.

What should I do after attaching the new cutter head?

After attaching the new cutter head, test the pruner by checking the cutting action, ensuring blade alignment, and inspecting for any issues.

Why is regular maintenance important for Fiskars pruners?

Regular maintenance, such as applying lubrication and proper storage, helps prevent damage and ensures the pruner functions effectively.

Why is testing the pruner after attaching a new cutter head crucial?

Testing the pruner before regular use is essential to avoid accidents and identify any issues with the newly attached cutter head.

+ posts

Jackson Hill is a passionate arborist with years of experience in the field of trees. He developed his fascination with trees at a young age, spending countless hours exploring the forests and climbing trees. Jackson went on to study arboriculture and horticulture at Michigan State University and later earned a degree in forestry from the University of Michigan.

With his extensive knowledge and expertise, Jackson has become a trusted authority on trees and their impact on the environment. His work has helped shape the field of arboriculture and he continues to be a leading voice in the industry.

How to Maintain and Assemble Your Hand Pruner with Internal Spring: Essential Tips

Leave a Comment

Send this to a friend