How to Install a New Blade on Your Remington Pole Saw: Step-by-Step Guide

Step-by-Step Guide to Changing the Blade on a Remington Pole Saw

To change the blade on your Remington Pole Saw, follow these simple steps:

  • Step 1: Ensure the pole saw is turned off and disconnected from any power source.
  • Step 2: Use a screwdriver to remove the screws or bolts that secure the blade cover in place.
  • Step 3: Carefully remove the blade cover to expose the blade.
  • Step 4: Loosen the nut or bolt holding the blade in place using the appropriate tool.
  • Step 5: Remove the old blade and replace it with a new one, ensuring it is securely in place.
  • Step 6: Tighten the nut or bolt to secure the new blade.
  • Step 7: Replace the blade cover and secure it with the screws or bolts.
  • Step 8: Inspect the blade to ensure it is properly installed before using the pole saw again.

Safety Precautions Before Changing the Blade

Before you start changing the blade on your Remington Pole Saw, it’s essential to prioritize safety. Follow these precautions to ensure a smooth and injury-free blade replacement process:

  • Disconnect the Power: Before any maintenance work, make sure to unplug the pole saw from the power source to avoid accidental starts.
  • Wear Protective Gear: Put on gloves and safety goggles to shield your hands and eyes from sharp edges and debris.
  • Choose a Stable Work Area: Find a flat and well-lit surface to work on, ensuring stability and visibility during the blade replacement.
  • Inspect the Saw: Before proceeding, check the pole saw for any damaged parts that might affect the blade replacement process.
  • Work Methodically: Follow the manufacturer’s instructions in the user manual to avoid any mistakes during the blade changing process.
How to Fix Rope Pull on Poulan Pole Saw: Step-by-Step Repair Guide

Tools Required for Blade Replacement

When changing the blade on your Remington Pole Saw, having the right tools at your disposal is essential. Here are the tools you’ll need:

  • Screwdriver: To help with removing any screws holding the blade in place.
  • Wrench: For loosening nuts or bolts securing the blade.
  • Work Gloves: Protect your hands from sharp edges and debris.
  • Safety Glasses: Shield your eyes from any flying particles or debris.
  • New Blade: Ensure you have the correct replacement blade for your Remington Pole Saw model.
  • Owner’s Manual: Always refer to the manufacturer’s instructions for your specific saw model.

Remember, having these tools ready before you start the blade replacement process can save you time and make the task much smoother.

Removing the Old Blade

When Removing the Old Blade on your Remington Pole Saw, you’ll want to follow these simple steps:

  • Step 1: Power Off: Before starting, make sure the saw is unplugged to avoid any accidents.
  • Step 2: Secure the Blade: Use a wrench to hold the hex bolt in place while you unscrew the nut holding the blade in position.
  • Step 3: Remove the Blade: Once the nut is off, slide the old blade from the bolt – it should come off easily.
  • Step 4: Inspect for Damage: Take a quick look at the old blade. If it’s worn out or damaged, it’s definitely time for a replacement.

These steps should help you smoothly remove the old blade from your pole saw.

Installing the New Blade

Here’s the exciting part – getting that new blade on your Remington Pole Saw! Follow these steps for a smooth installation process:

  • Step 1: Align the Blade

  • Make sure the new blade is correctly aligned with the saw to prevent any issues during use.
  • Step 2: Secure the Blade

  • Firmly tighten the bolt to secure the new blade in place. This ensures the blade stays put while in operation.
  • Step 3: Test Before Use

  • Before you start cutting, give the saw a quick test to ensure the new blade is installed correctly and securely.
How to Safely Trim a Palm Tree with a Pole Saw: Essential Guide

Remember, a properly installed blade is crucial for the safe and effective operation of your pole saw.

Statistic Number
Remington Pole Saw Blades Cost $15-30
Average Blade Lifespan 6-12 months
Installation Time 5-10 minutes


You’ve now learned the essential steps for changing the blade on your Remington Pole Saw. By aligning the blade correctly, securely tightening the bolt, and testing the saw before use, you ensure a smooth and safe operation. Remember, the cost of replacement blades, their average lifespan, and the estimated installation time are key factors to consider. With these insights, you’re equipped to confidently maintain your pole saw for optimal performance. Happy sawing!

Frequently Asked Questions

How do I install a new blade on my Remington Pole Saw?

To install a new blade on your Remington Pole Saw, align the blade correctly, securely tighten the bolt, and test the saw before use.

What is the cost of a Remington Pole Saw blade?

The cost of a Remington Pole Saw blade varies but generally ranges from $15 to $30.

How long does a Remington Pole Saw blade last?

On average, a Remington Pole Saw blade can last for about 2 to 3 years with proper maintenance.

How long does it take to install a new blade on a Remington Pole Saw?

Typically, it takes around 10 to 15 minutes to install a new blade on a Remington Pole Saw.

Jackson Hill is a passionate arborist with years of experience in the field of trees. He developed his fascination with trees at a young age, spending countless hours exploring the forests and climbing trees. Jackson went on to study arboriculture and horticulture at Michigan State University and later earned a degree in forestry from the University of Michigan.

Can You Use a Cordless Pole Saw as a Pole Pruner? Pros, Cons, and Tips

With his extensive knowledge and expertise, Jackson has become a trusted authority on trees and their impact on the environment. His work has helped shape the field of arboriculture and he continues to be a leading voice in the industry.

Leave a Comment

Send this to a friend